Wireless Access

Reply
New Contributor
Posts: 2
Registered: ‎12-06-2012

Pantech UML 295 support on RAP 5WN

Currently we're using Pantech UML 290 4G cards.  The new cards we've received are Pantech UML 295's.  The current config looks like this:

 

config t
provision-ap
read-bootinfo ap-name <AP_NAME>      (AP_NAME is the name of the RAP-5 that is assigned to it. Default is usually MAC address)
4g-usb-type pantech-lte
usb-dial ATDT*99***3#
link-priority-cellular 120                          (Assigning a higher number makes whichever link become what the RAP first goes too)
link-priority-ethernet 110
master <public ip address of the cotroller>  nnn.nnn.n.nnn
reprovision ap-name <AP_NAME>
end

 

What needs to change to allow the use of the UML 295?

Regular Contributor I
Posts: 166
Registered: ‎04-11-2011

Re: Pantech UML 295 support on RAP 5WN

[ Edited ]

BUMP

 

Do any of the Aruba employees know if the Pantech UML 295 will be supported.  6.2.1.0 release notes only list support for the 290 but it appears that it has been replaced by the 295.

New Contributor
Posts: 2
Registered: ‎12-06-2012

Re: Pantech UML 295 support on RAP 5WN

I rec'd an email from Aruba support yesterday that the UML295 is not currently supported, but they are working with Pantech to come up with the solution.  Of course testing will need to be done after that.

Contributor II
Posts: 140
Registered: ‎01-04-2012

Re: Pantech UML 295 support on RAP 5WN

Does anyone know if the UML 295 is currently supported? 

 

New Contributor
Posts: 2
Registered: ‎01-10-2012

Re: Pantech UML 295 support on RAP 5WN

Has there been any update on this? does anyone know if the UML295 is supported now or will be supported soon?

Aruba Employee
Posts: 1
Registered: ‎06-11-2013

Re: Pantech UML 295 support on RAP 5WN

You may want to contact the Product management team at Aruba and they can provide you an update on which release these cards will be supported. 

Occasional Contributor II
Posts: 12
Registered: ‎08-07-2012

Re: Pantech UML 295 support on RAP 5WN

I too am needing support for the UML 295.  Limited options now under verizon.

 

Regular Contributor I
Posts: 166
Registered: ‎04-11-2011

Re: Pantech UML 295 support on RAP 5WN

Try this:

 

config t
provision-ap
read-bootinfo ap-name <apname>
usb-type ether
usb-dev 0x1410b001
link-priority-cellular 110
link-priority-ethernet 100
reprovision ap-name <apname>
end

Contributor I
Posts: 26
Registered: ‎03-28-2012

Re: Pantech UML 295 support on RAP 5WN

Does anyone know if this has been an agenda item covered recently? We are looking at a remote access deployment and support for this USB device would be required. The Pantech UML 295 is the only corporate suppored USB 4G device with Verizon.

New Contributor
Posts: 1
Registered: ‎07-16-2012

Re: Pantech UML 295 support on RAP 5WN

New firmware 6.3.1.3 supports the UML295 it can be selected when its provisioned. It still is not available for zero-touch provisioning.

Search Airheads
Showing results for 
Search instead for 
Did you mean: