So apparently in order to bring up the VLAN interface I had to add it under the port channel as access VLAN on top of it being a trunk. Is that right?
So everytime I create a new VLAN interface I will need to add it under the port channel as an access VLAN?
interface gigabitethernet 0/0/1
description "GE0/0/1"
trusted
trusted vlan 1-4094
switchport trunk native vlan 206
switchport trunk allowed vlan 15,23,32,99,134-138,200-206,812,1001
lacp timeout short
lacp group 0 mode active
!
interface port-channel 0
trusted
trusted vlan 1-4094
switchport mode trunk
switchport access vlan 206
switchport trunk native vlan 206
switchport trunk allowed vlan 15,23,32,99,134-138,200-206,812,1001