Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Problems with RAP deployment

This thread has been viewed 1 times

  • 1.  Problems with RAP deployment

    Posted May 22, 2015 06:07 AM

    Hi community,

     

    I´ve problems to deploy my rap3. we ´ve a 7030 controller with code6.4 running.

    APs works fine.

    The RAP woks fine when I put it into a local ethernet port in our companys lan.

    Capture.JPG

    but when I put my 3g Sitck in it the rap comes up and i can see it for short time on my controller it says:

    Flag Rc2D and I cannot see it into the controller gui. The 3g stick works fine, I can ping 8.8.8.8 from the rap and I can ping the external ip of the controller...

    What is the problem?



  • 2.  RE: Problems with RAP deployment
    Best Answer

    EMPLOYEE
    Posted May 22, 2015 06:14 AM

    You should first see if it will work on a wired port on the public internet.  That will rule out an issue with your 3G stick.

     

    #! resolution to this issue:  If the ap-group that the AP is in has a system profile that has an lms-ip in it, remove the LMS-ip.



  • 3.  RE: Problems with RAP deployment

    Posted May 22, 2015 06:27 AM

    Thanks, what a fast anwer.... :-)

     

    shame on me, it was the lms promlem