Wireless Access

Reply
Frequent Contributor I
Posts: 66
Registered: ‎05-12-2009

QOS Over VPN

I am wondering how others are implementing QOS over their remote AP's in home office/small office.  We have a number of RAP2's deployed with wired phones.  I have a user role/policy created  for wired phones after they authenticate via MAC auth called VOIP_ONLY  that allows only UDP for VOIP.  The queueing is set to high for UDP traffic.  My issue is the Wireless clients connected to the RAP never get placed into that role.  They are in the authenticated role after 802.1x auth.  How do the two roles relate to each other as far as queueing and is there a better way to do this.

 

Thanks

Guru Elite
Posts: 21,257
Registered: ‎03-29-2007

Re: QOS Over VPN

Do you have a mac authenticated profile attached to the same AAA profile?  If so, what is the default mac authentication role?

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Frequent Contributor I
Posts: 66
Registered: ‎05-12-2009

Re: QOS Over VPN

The AAA profile used for the secure wireless connection does not have a mac-authentication profile defined.  The AP Wired Port profile has the mac-auth AAA profile defined.  Hope that makes sense.

Guru Elite
Posts: 21,257
Registered: ‎03-29-2007

Re: QOS Over VPN

Okay.  Did you turn on debugging for that specific user to see what is happening?

 

 

config t

logging level debug user-debug <mac address of user>

 

After you connect the user, type:

 

show log user-debug 50

 

That will tell you what is happening to that user on the port.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: