Wireless Access

Reply
Occasional Contributor I

RAP-3WN Configuration

dear all,

 

please help me is there any way to configure DHCP server in RAP-3WN with out controller?

Regular Contributor II

Re: RAP-3WN Configuration

Go to System and Enable Show Advanced Options

 

And there is a tab with DHCP Settings (only for Client with Virtual Controller Assigned)

ACMP 6.4 / ACMX #107 / ACCP 6.5
Community Administrator

Re: RAP-3WN Configuration

The DHCP configuration is under the "More" tab if you need to specify specific pools.

CWNA, ACMP, Security +
Occasional Contributor I

Re: RAP-3WN Configuration

Dear alagoutte & Jamie E thanks for your kind response. If you have any scrreen shot then please share it.

 

Regards

Regular Contributor II

Re: RAP-3WN Configuration

ScreenShot174.png

:-)

ACMP 6.4 / ACMX #107 / ACCP 6.5
Occasional Contributor I

Re: RAP-3WN Configuration

Thanks dear:)

 

 

all wtreless clients get my assigned ips. Now there is one more problem i conect switch with rap now the problem is all wired users unable to get ip which i define in dhcp kindly guide  me 

Regular Contributor II

Re: RAP-3WN Configuration


asad rasool goraya wrote:

Thanks dear:)

 

 

all wtreless clients get my assigned ips. Now there is one more problem i conect switch with rap now the problem is all wired users unable to get ip which i define in dhcp kindly guide  me 


Hi,

 

The DHCP is only for Wireless client (like it is say in screenshot)

for wired client, you need a another DHCP Server

ACMP 6.4 / ACMX #107 / ACCP 6.5
Occasional Contributor I

Re: RAP-3WN Configuration

ok thanks dear

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: