Wireless Access

Reply
Occasional Contributor II
Posts: 11
Registered: ‎04-06-2010

RAP - UDP Port 4500 already used

Hi all,

i'm planning to implement an Aruba solution  to a customer who has a Cisco infrastructure (Switch, FW, Router...)...

At the moment he use UDP port 4500 for his VPN clinets... is it possible to use RAPs with an other port?

Thanks for the help,

Nicola

Aruba
Posts: 760
Registered: ‎05-31-2007

Re: RAP - UDP Port 4500 already used

The RAPs port to use for communication is not configurable.


It is always UDP 4500 (standard NAT-T).

 

Could you recommend a seperate/additional public IP address for the RAPs to 'point towards' as a solution perhaps ?

Search Airheads
Showing results for 
Search instead for 
Did you mean: