Wireless Access

last person joined: 3 days ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

RAP and PCI compliance

This thread has been viewed 0 times

  • 1.  RAP and PCI compliance

    Posted Dec 03, 2012 06:00 PM
      |   view attached

    I am wondering if anyone can give me some information on the RAP's and it's ablility to be PCI compliant in the following configuation.

     

    I will have a DSL/3g/4g connection into a RAP5 the RAP will provide normal Wireless monitoring and connectivity for NON CDE data. 1 port on the RAP5 will be set to tunel all traffic back to datacenter and will have PCI data on it.

     

    See the attached PDF for a visual of what i am looking at.

    Attachment(s)

    pdf
    RAP Question.pdf   209 KB 1 version


  • 2.  RE: RAP and PCI compliance

    Posted Jun 08, 2014 04:47 PM

    Statefull firewall inspection (check)

    Segmentaiton of CDE and non-CDE data (check)

    WPA/WPA2 encryption on CDE network (check I assume??)

     

    Assuming you're also doing rogue detection you should be compliant.

     

    This question was posted a while ago, so I assume you figured it out.  Can you reply back with your experience in making sure your network was PCI compliant?