Wireless Access

Reply
Frequent Contributor II
Posts: 127
Registered: ‎12-19-2012

RAP over Mesh queery

Hi all, I have a simple IAP134 Mesh point/portal, im going to convert to controller based.  At the point end can I have 105's configured as RAP's , for access back to the controller ? Any reason why not ??

 

Thanks

ACMA/ACMP
MVP
Posts: 1,357
Registered: ‎11-07-2008

Re: RAP over Mesh queery

An AP-105 over an IAP 134/135 mesh? It should be fine so long as the 105 knows how to find the controller.

Jerrod Howard
Sr. Techical Marketing Engineer
Frequent Contributor II
Posts: 127
Registered: ‎12-19-2012

Re: RAP over Mesh queery

Cheers Jerod, yes I guessed as much, they are alredy configured as RAP's but intermittently drop off the network, Mesh seems ok but not sure what sort of latency/dropout would mean Raps would reboot ??

ACMA/ACMP
Aruba Employee
Posts: 58
Registered: ‎07-24-2014

Re: RAP over Mesh queery

Hi, could you please tell me what is the reboot or bootstrap info you see from ap debug system-status output?
MVP
Posts: 1,357
Registered: ‎11-07-2008

Re: RAP over Mesh queery

You may also want to set the IAPs to a static channel and power and disable ARM to see if maybe you are hitting some channel changes that are dropping the RAP link.

Jerrod Howard
Sr. Techical Marketing Engineer
Search Airheads
Showing results for 
Search instead for 
Did you mean: