Wireless Access

Reply
DSP
Contributor II
Posts: 37
Registered: ‎03-25-2013

Radius-interim-accounting interval

Hello, 

 

I have enabled radius-interim-accounting and would like to customize the interval down to 180sec. by default it seems to be sending the updates every 600 sec.

 

Looking at the CLI guide I can see : 

 

radius-interim-accounting By default, the RADIUS accounting feature sends only start and stop messages to the RADIUS accounting server. Issue the interim-radiusaccounting command to allow the controller to send Interim-Update messages with current user statistics to the server at regular intervals.

 

Are these intervals customizable ?

 

Thanks, 

 

DSP

 

Guru Elite
Posts: 21,492
Registered: ‎03-29-2007

Re: Radius-interim-accounting interval

Please see "User Interim Stats Frequency" here:  http://www.arubanetworks.com/techdocs/ArubaOS_64x_WebHelp/Web_Help_Index.htm#ArubaFrameStyles/AAA_Servers/Configuring_Authenticati.htm



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

DSP
Contributor II
Posts: 37
Registered: ‎03-25-2013

Re: Radius-interim-accounting interval

 

Hello Cjoseph. 

 

Thanks for your reply.  

 

I can see this can be tune as a global parameter, currently set to 600sec : 

 

User Interim stats frequency = 600 seconds

 

Currently I have a request to set two different aaa profiles with different interim values one to be at 600sec and other 180sec … we are running 6.3.15 … would this customizable per aaa profile to override the global counter of 600sec ?

 

Or we can only set this globally and be the same for all aaa profiles ?

 

Thanks, 

 

DSP

 

 

 

 

Guru Elite
Posts: 21,492
Registered: ‎03-29-2007

Re: Radius-interim-accounting interval

It can only be set globally.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

DSP
Contributor II
Posts: 37
Registered: ‎03-25-2013

Re: Radius-interim-accounting interval

 

Thank you for the confirmation. 


DSP

Search Airheads
Showing results for 
Search instead for 
Did you mean: