Wireless Access

Reply
Contributor I

Remote AP Not Working

Hi all,

I'm struggling to get my first remote AP working correctly. I've tried following the various guides and the documentation and have progressed...but it's still not showing up.

 

At this point, by looking into the logs, I can see that it's making an IKE connection with the controller, but it never progresses enough. I've attached the logs.

 

This is an IAP-205H converted to a campus AP, then provisioned as a RAP on our master/local controllers running 6.4.

 

Thanks for any pointers, I thought this was going to be much easier than it was (or I should have just followed the darned wizard...)

 

--Ben

Guru Elite

Re: Remote AP Not Working

Make sure in the ap-group, in the AP system profile, there is no LMS-IP



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I

Re: Remote AP Not Working

Whoops, there was the internal addresses listed in there, and I have removed them.

 

Will I need to reset the AP and provision it again, or will it pick up on that automatically?

Guru Elite

Re: Remote AP Not Working

Just reboot it.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I

Re: Remote AP Not Working

Thank you! That did it! I can't tell you how much time I spent fighting with this yesterday.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: