Announce to maintenance time of 10 min.
Disconnect your master
go to your local - set it as master and reboot
assign the same IP address that was to your previous master to this controller - and reboot
That's it. :smileyhappy:
**pay attention - that if u got some interfaces/vlan - u might need to change those IP also
**pay attention - if your AP system profile using LMS/BACKUP LMS < configure it as needed.
**pay attention - if up until now u were using DNS resolving in order to find the aruba-master <edit your DNS server settings.
**pay attention - if you are using centralized licensing <> check you got all the needed licensees installed and activated on your new master (your old local )