Wireless Access

last person joined: an hour ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

SSL Certificate generation/installation issue

This thread has been viewed 7 times

  • 1.  SSL Certificate generation/installation issue

    Posted Jan 23, 2014 04:20 AM

    Hello community,

     

    I am having a problem with getting an SSL certificate installed in my AMP 7.6.0.

    I generated the CSR as mentioned in one of the replies in this thread:

    http://community.arubanetworks.com/t5/AirWave-and-Network-Management/How-to-install-certificate/m-p/7076/highlight/true#M180

     

    I was able to generate the CSR, get the certificate from the CA and install them just like described.

    However, When I restarted the appachi nothing changed and the old SSL is still appearing on the HTTPS URL.

     

    - How can I install the certificate correctly?

    - What about installing the certificate usign the GUI? Should I merge the generted certificate with the private key before installing it?

    - What if my certificate is published using an intermediate certificate? should I merge all the certificates in a p12 cert type file?

     

    Thanks.

     

    Amjad



  • 2.  RE: SSL Certificate generation/installation issue
    Best Answer

    Posted Jan 26, 2014 01:00 AM

    I opened a ticket with the TAC and they provided the procedure. It is available in this link:

    http://goo.gl/h5jOwc

     

    The procedures I was following is not complete. it is missing some steps.