Wireless Access

Reply
Occasional Contributor I

Signal Quality

Good Day,

 

If the connected client has a signal quality of - does that mean that it could not be measured, or is it below a limit? AMP™ 7.5.7

 

Thanks

Moderator

Re: Signal Quality

Typically, you might see a '-' for signal quality for clients that have not yet been associated/authenticated.  A common case is if the user is in the 'logon' role.  You may also see this frequently from traps that convey signal on an irregular basis.  Polling the controller again may yield an update that populates the signal quality.


Rob Gin
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: