Wireless Access

Reply
Occasional Contributor II

Slave settings not updating correctly from master controller

Hello,

 

Long story short, I had to change my RADIUS shared secret on my NPS server recently, and when I update the secret on my master controller, it never changes on the second controller. Users trying to authenticate through this controller to the RADIUS server are denied access because the RADIUS secret is incorrect. Anyone know how I can change this on the slave controller? The options are all greyed out when I view the RADIUS server settings.

 

Thanks!

Aruba

Re: Slave settings not updating correctly from master controller

Assuming the controllers are talking to one another, when you click Save Configuration, it will push the change to all the local controllers.

 

If you did this already, run show switches to see if the local is visible.

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

Occasional Contributor II

Re: Slave settings not updating correctly from master controller

Save Configuration worked perfectly.... thank you very much.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: