Hi All,
Im having issue during migration. Details as below :
1) Migrate from controller 3400(6.1.3.6 firmware) to 7210(6.4.4.0 firmware).
2) Use back all the same configuration to new controller by manually config.
3) All AP(AP93 and AP105) in current setup using RAP mode and end user manually insert the IP details using console. They dont want to purge all the AP setting as required more downtime and will impact their operation. Thats the reason we use back the old setting and deployment method.
4) During the migration, only 158 APs UP instead of 228 APs. The VPN pool is enough and all the AP MAC address whitelisted.
5) Rolled back to old controller, all the APs was UP.
Any idea on this?
Thanks.
#7210