Wireless Access

Reply
Occasional Contributor II
Posts: 16
Registered: ‎02-15-2016

Switch alert

I have set up the S1500 switch, but the status led have blinking in red continuously.

The alert is inline power detected on Ge0/0/4

What does this means?

MVP
Posts: 359
Registered: ‎05-09-2013

Re: Switch alert

Is GE0/0/4 uplinked to something? If so, what?


Michael Haring | Senior Network Engineer
Comm Solutions, an Optiv Security Company
www.commsolutions.com | www.optiv.com
Occasional Contributor II
Posts: 16
Registered: ‎02-15-2016

Re: Switch alert

Sorry
What command should I type or where should I check?
I have connected the S1500 switch port1 to the router. Will this affect?
MVP
Posts: 359
Registered: ‎05-09-2013

Re: Switch alert

If the device is running LLDP you can try "show lldp neighbors". Also do a "show port status" i believe on the S1500 to see if Ge0/0/4 is up.

In the mean time, opening a support case with Aruba would also
he a good idea as they can provide remote assistance.

Michael Haring | Senior Network Engineer
Comm Solutions, an Optiv Security Company
www.commsolutions.com | www.optiv.com
Search Airheads
Showing results for 
Search instead for 
Did you mean: