Wireless Access

Reply
New Contributor

The controller uses UDP 4896 to access airwave

firewall log.jpg

 

hi guys

My controller uses UDP 4896 to access airwave.

What's happening here?

 

 

Guru Elite

Re: The controller uses UDP 4896 to access airwave

That is not a common port.  SSH into the controller and type "show datapath session table <ip address of airwave>" to see what traffic it is sending on what ports to Airwave.

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: