Wireless Access

Reply
New Contributor

Throughput from an Instant

Hi,

 

I have an IAP 305 cluster that connects into AirWave and we have an application that seems to be running slow in our stores.  Our wireless handhelds use a couple of applications, however, one of them seems to be running very slowly.  I do not believe that this is RF but I need to prove it... Is there anything either in the CLI or Airwave where I can view throughput or response for an application.  If not could I get usage stats for a handheld that might prove useful.

 

Thanks,

Re: Throughput from an Instant

>From airwave search for the device using the MAC address and check the SNR of the client (25db and up) and also the RF quality( High utilization , interference , Layer 2 retries, etc..) of the AP itself

Get Outlook for iOS
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
New Contributor

Re: Throughput from an Instant

Thank you, I apprecite your help.

 

I can look at the SNR in AirWave but I am unsure about how I would find the High utilization , interference and Layer 2 retries on the CLI.

 

Jonathan

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: