Wireless Access

Reply
Highlighted
Frequent Contributor I

Time Based SSID Broadcast - Controller and Instant

Hi All

I was hoping there is a way to set a SSID to only broadcast at certain times.


On Controllers I know about the "Deny Time Range" option, however the SSID is still broadcasting during that time, is there a way to set profile to stop broadcasting all together during a specific time?

 

On iAP I see there options for Time Range (this under edit for the SSID and expanding Advanced) - however I am unfamiliar with the feature on iAP, setting a time range here will it only broadcast during that time or is it also a Deny like on the Controllers?

Re: Time Based SSID Broadcast - Controller and Instant

Hey, it will disable the SSID.

 

time-range.JPG

ACMA, ACMP
If my post addresses your query, give kudos:)
Frequent Contributor I

Re: Time Based SSID Broadcast - Controller and Instant

Awesome THX Zalion

Is there away to achieve the same on a Controller (3600 and 7210)?

MVP

Re: Time Based SSID Broadcast - Controller and Instant

Hi,

 

you can deny connections but the SSID will still be visible.

 

You'll configure this under VAP - deny timer range.

Timer range is configured under Access Control - Timer range 

or conf t, timer-range on the CLI.

 

Hope it helps

Regards,
Borja
ACMX #567 //ACCP//CWNA//CWAP
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: