Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Time Based Services not working

This thread has been viewed 0 times

  • 1.  Time Based Services not working

    Posted Aug 15, 2018 11:56 AM
      |   view attached

    Hi all,

     

    Just want to ask why my time based services is not working? My SSID is still available even it exceeds on the time set. I also followed the steps on how to configure it.

     

    I am using the instant UI(shown in the picture). Can you help me out? 

     

    Thank you!



  • 2.  RE: Time Based Services not working

    EMPLOYEE
    Posted Aug 15, 2018 03:11 PM
    @JLewis_ wrote:

    Hi all,

     

    Just want to ask why my time based services is not working? My SSID is still available even it exceeds on the time set. I also followed the steps on how to configure it.

     

    I am using the instant UI(shown in the picture). Can you help me out? 

     

    Thank you!

    There isn't much detail in the attached picture.

     

    Does the Instant AP have an NTP server and timezone defined for obtaining valid date/time? What version of Instant are you running? How is the time range profile configured? 

     

    What is the behavior that you're expecting, and how is it not behaving as expected?



  • 3.  RE: Time Based Services not working

    Posted Aug 15, 2018 03:19 PM
      |   view attached

    Hello,

     

    I have no idea how the NTP is configured. This is how I set the time based services... (image below) I am expecting it to disconnect me but I am still connected and can browse the internet.



  • 4.  RE: Time Based Services not working

    EMPLOYEE
    Posted Aug 15, 2018 03:25 PM

    For real, if your time is not set correctly, this feature would have no idea what time, date or day it is and not work.

     

    Please SSH into the Virtual Controller and type "show clock" to see if your time is set correctly.



  • 5.  RE: Time Based Services not working

    Posted Aug 15, 2018 05:30 PM

    Do you have the steps if ever it won't show any clock? 

    Thanks!



  • 6.  RE: Time Based Services not working

    EMPLOYEE
    Posted Aug 15, 2018 05:49 PM
      |   view attached

    Virtual Controller -> System options are were you set both NTP for the time source and the timezone.

     

     



  • 7.  RE: Time Based Services not working

    Posted Aug 16, 2018 11:49 AM

    Hi, 

     

    I tried doing the "show clock"

    I do the SSH to my wifi router and it displays the current time

    but it shows 1970-01-03 09:27:05

     

    How can I change it to the present date / time? What is the correct format when I change it?

     

    Thank you!



  • 8.  RE: Time Based Services not working
    Best Answer

    EMPLOYEE


  • 9.  RE: Time Based Services not working

    Posted Aug 16, 2018 03:37 PM

    I think it works now because I can't connect my device before the time I set for the time based services but now it does not disconnect my device even it exceeds the time frame.