Wireless Access

last person joined: 2 days ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Unable to convert a RAP155 with 3200XM

This thread has been viewed 0 times

  • 1.  Unable to convert a RAP155 with 3200XM

    Posted Sep 10, 2014 07:31 AM
      |   view attached

    Hi Guys,

    One of my RAP5's failed over night so I have got to send a replacement out. I have a spare RAP155 in the office so decided to use this. 

     

    Ive come to convert it but keep getting fails when "Setup VPN" this is not the first 155 I have used so im not sure why this is happening... I have attached the log file.

     

    Any help would be greatly appreciated! 

     

    Regards

    Anthony

    Attachment(s)

    txt
    rap155_log.txt   9 KB 1 version


  • 2.  RE: Unable to convert a RAP155 with 3200XM

    Posted Sep 10, 2014 07:36 AM

    Tried adding the RAP to the white list to no avail. 



  • 3.  RE: Unable to convert a RAP155 with 3200XM

    Posted Sep 10, 2014 08:53 AM

    To convert it make sure you go to the maintenanace TAB , also your controller needs to be using AOS 6.3.0.0 and up to support the RAP155

    2014-09-10 08_50_59-Instant.png



  • 4.  RE: Unable to convert a RAP155 with 3200XM

    Posted Sep 10, 2014 08:55 AM

    Hi Thanks for your response, but as I mentioned this is not the first RAP155 I have provisioned on this controller and versions are all correct.

     

    Thanks

    Anthony



  • 5.  RE: Unable to convert a RAP155 with 3200XM

    Posted Sep 10, 2014 09:20 AM
    Do you have enough licenses ?

    Is there a firewall at that locations ? Can you check show datapath session table <IP address> | include 4500

    Make sure you have enough internal IPs in the controller


  • 6.  RE: Unable to convert a RAP155 with 3200XM

    Posted Sep 10, 2014 09:40 AM
    @victorfabian wrote:
    Do you have enough licenses ? Yes

    Is there a firewall at that locations ? Can you check show datapath session table <IP address> | include 4500 No firewall, old RAP5 was working fine.

    Make sure you have enough internal IPs in the controller - Yes loads

    Answers above.