Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Uplink Problems?

This thread has been viewed 1 times

  • 1.  Uplink Problems?

    Posted Jul 04, 2013 01:39 PM

    I'm hoping I'm just missing something easy with spanning-tree, but here is what I have:

    I have 9 Aruba S2500 switches, 6 in the first stack and 3 in the other.  A Palo Alto serving up 5 VLANs to the first Aruba stack (6 switches).  From there I have the other Aruba stack that is connected via 10Gb to the first stack.

     

    On the 10Gb port connecting the 2 stacks I have all VLANs allowed via a trunk and the VLANs are configured the same on both stacks.  On the second stack I can't access the first stack's web UI, and same going from the first stack to the 2nd.  I'm guessing I forgot something stupid, and I hope someone has an idea of what that is.

     

    Thanks!



  • 2.  RE: Uplink Problems?

    EMPLOYEE
    Posted Jul 05, 2013 11:22 AM

    Can you attach the two configurations and the "tech-support" outputs from both?