Wireless Access

Reply
Occasional Contributor II

Use both ethernet interfaces on IAP 325.

How do I use both interfaces for higher bandwidth / redundancy on IAP 325. We yet to receive controller 7010.

 

I would like IAP 325 to use both ethernet ports.

Contributor II

Re: Use both ethernet interfaces on IAP 325.

You need to configure LACP on the switch.

 

If already not enabled, you can use below document to enable LACP on the IAP:

https://community.arubanetworks.com/t5/Controller-less-WLANs/LACP-configuration-support-on-IAP/ta-p/267467

 

 

JayBee
ACDX | CCIE (RnS/SP,DC) | ACCP | ACMP | ACMA | JNCIS | JNCIA
If the provided solution resolves your issue, please mark it as accepted solution to help others.
Occasional Contributor II

Re: Use both ethernet interfaces on IAP 325.

Do I need to connect both ports on PoE or only one would be fine on IAP?

Contributor II

Re: Use both ethernet interfaces on IAP 325.

One should be fine. Instead of POE, consider using POE+ else your AP will work in restricted mode.

JayBee
ACDX | CCIE (RnS/SP,DC) | ACCP | ACMP | ACMA | JNCIS | JNCIA
If the provided solution resolves your issue, please mark it as accepted solution to help others.
Occasional Contributor II

Re: Use both ethernet interfaces on IAP 325.

We are using injectors from Aruba only. adapter says 55V, 0.6A.

 

I believe its PoE+ only..

Contributor II

Re: Use both ethernet interfaces on IAP 325.

PowerDsine power injectors come with both 802.3at and af models. Hope you have got at model.

JayBee
ACDX | CCIE (RnS/SP,DC) | ACCP | ACMP | ACMA | JNCIS | JNCIA
If the provided solution resolves your issue, please mark it as accepted solution to help others.
Occasional Contributor II

Re: Use both ethernet interfaces on IAP 325.

It's Microsemi PD-9001GR/AT/AC

 

Online information says, its PoE+ .. :)

 

Let me try out configuration and will update thread.

Aruba

Re: Use both ethernet interfaces on IAP 325.

Good. No restrictions with that injector.

 

/Onno
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: