Hello community,
i would like to send command autommatically to set up my Access Point, Aruba 320 serie (change data rates, mcs, channel, bandwidth ...).
I use plink.exe to do that :
plink.exe -v -ssh -2 -noagent -batch -pw admin -l admin 169.254.172.5 -P 22 {command}
(it's just an example, i tried every solution i found like "-m", "<")
I've got this error message :
Looking up host "169.254.172.5"
Connecting to 169.254.172.5 port 22
We claim version: SSH-2.0-PuTTY_Release_0.64
Server version: SSH-2.0-OpenSSH_5.8
We believe remote version has SSH-2 channel request bug
Using SSH protocol version 2
Doing Diffie-Hellman group exchange
Doing Diffie-Hellman key exchange with hash SHA-1
Host key fingerprint is:
ssh-rsa 2048 6f:a4:b3:b9:2d:0c:0c:f8:c8:66:21:7b:4d:92:cd:ce
Initialised AES-256 SDCTR client->server encryption
Initialised HMAC-SHA1 client->server MAC algorithm
Initialised AES-256 SDCTR server->client encryption
Initialised HMAC-SHA1 server->client MAC algorithm
Using username "admin".
Sent password
Access granted
Opening session as main channel
Opened main channel
Received disconnect message (protocol error)
Disconnection message text: Only cli connections are allowed to the AP
Server sent disconnect message
type 2 (protocol error):
"Only cli connections are allowed to the AP"
FATAL ERROR: Server sent disconnect message
type 2 (protocol error):
"Only cli connections are allowed to the AP"
Is there a way to configure the AP to allowed command sent directly in plink command line?
Is there an other tool or protocol to fix this problem?