Wireless Access

last person joined: 5 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Username of the connected clients not shown in controller

This thread has been viewed 3 times

  • 1.  Username of the connected clients not shown in controller

    Posted May 30, 2014 04:16 AM

    Aruba controller not showing username of the connected controller? Any idea?

     

    Controller details as below:

     

    Model : Aruba3600

    Version : 6.3.1.0

     



  • 2.  RE: Username of the connected clients not shown in controller

    EMPLOYEE
    Posted May 30, 2014 04:34 AM

    What is the authentication method?



  • 3.  RE: Username of the connected clients not shown in controller

    Posted May 30, 2014 04:46 AM

    Hi Michael,

     

    It's using EAP-SIM as authentication method.



  • 4.  RE: Username of the connected clients not shown in controller

    EMPLOYEE
    Posted May 30, 2014 07:28 AM

    Can you please show us the output of "show user-table verbose"



  • 5.  RE: Username of the connected clients not shown in controller
    Best Answer

    Posted May 30, 2014 04:57 PM

    EAP-SIM usually will show the IMSI (International Mobile Subscriber Identifier) to identify the device; not a username.    The IMSI is a string made up of a few items (Mobile Country Code, Mobile Network Code, and the Mobile Subscriber Identification Number).