Wireless Access

Reply
New Contributor

VRRP on Mobility Masters - AOS 8.2.0.1

Hi all,

I'm testing VRRP on 2 Mobility Masters (MM)

I have 2 MMs:

- MM-01: Preferred-Master (Priority 200)

- MM-02: Backup (Priority 100)

I have configured a VR ID and Master Redundancy. But when I show on the cli, They're both Master state.

- They are time synchronized, ping each other ok.

My configuration is below

MM-01MM-01MM-01MM-01MM-01MM-01MM-02MM-02MM-02MM-02MM-02MM-02

Please help me on this issue.

Thanks a lot :)

Re: VRRP on Mobility Masters - AOS 8.2.0.1

Are these virtual MMs?

Get Outlook for iOS
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
New Contributor

Re: VRRP on Mobility Masters - AOS 8.2.0.1

Yep, I use virtual Mobility Master.

 

New Contributor

Re: VRRP on Mobility Masters - AOS 8.2.0.1

Here is my configuration.

Both of them are VR Master so Mac address of VRRP IP is changed between 2 interface physical of 2 MMs. The controller couldn't join MM.

 

Please help me on this case.

 

Thanks a lot 

Re: VRRP on Mobility Masters - AOS 8.2.0.1

Did you enabled forged transmit ? It is required to be enabled so that VRRP can work

Get Outlook for iOS
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
New Contributor

Re: VRRP on Mobility Masters - AOS 8.2.0.1

Ye ye, It works :)

I changed to accept on Forged Transmits option and now It works

 

Thanks a lot, Victor.

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: