Wireless Access

Reply
Regular Contributor I

Viewing client signal in Instant

Hi guys,

 

While checking some points in the Instant GUI I have realized about the signal a client is receiving, this is the graph in the RF trends tab:

signalinstant.PNG

The signal is about 25 dB. On one hand, the signal received by clients are measured in dBm and not dB. On the other hand the signal received by clients are in the range of -dBm, so 25 dB would be impossible. What am I missing?

 

Regards,

Julián

 


Regards,
Julián
Guru Elite

Re: Viewing client signal in Instant

The numbers are the signal strength that the AP sees from the client. If the number is positive, it is SNR. If it is negative, it is dbm.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Regular Contributor I

Re: Viewing client signal in Instant

Hi Colin,

 

Clear, many thanks!

 

Regards,

Julián


Regards,
Julián
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: