02-12-2013 07:57 PM
I am doing RF planning with VisualRF for a building where a company occupies multiple floors but not all consecutive. When I enable overlay of above and beyond floors, I see strong fairly strong signal leak from an AP that is 4 floors away. The floor numbers are correct, yet VisualRF doesn't seem to take this information into account.
02-12-2013 10:43 PM - edited 02-12-2013 11:51 PM
When u uploaded into the VisualRF the floorplans:
Did u used jpeg/png/bmp or other picture format - and entered the right dimension of each floor (including height?)
Did u used CAD/DWG file.And u checked the dimension - that they are right?
check those details - That might be your issue.also be sure the use the lastest visualrf version.
I also attached userguide for VisualRF (read it - it will give u good info)
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
02-15-2013 09:46 AM
Did you add a buffer floor in between? VisualRF currently doesn't have intelligence to determine if a floor is missing, so you'll want to try putting an empty floor inbetween for the purpose of between floor bleed through.
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company