I'm doing some testing with out Cisco Voip infrastrucutre, an 93H and a RAP3WNP. If I set the ports, on either device, directly into the VoiP vlan, the Phones work. No issues. Now, I'm trying to get the Wired Port on the back of the Phone to work in the data vlan. So in essence, you would plug the phone in, it would attach to the Voice vlan and the Wired Port on the back of the Voip phone would allow a computer to attach to the Data Network.
I've found the instrcutions for doing it on a Mobility Switch:
http://www.arubanetworks.com/wp-content/uploads/VoIPwMASAppNote-20120726.pdf
However, I can't seem to make those work for this setup, which doesn't really surprise me as they're really different products. Anyway to set a Voip-vlan on these with a Data-Vlan or are they only intended for a single vlan per port? The Pass-Through port is one solution for the 93H, but I'm more concerned with a RAP scenerio, with no Pass-through available.
Has anyone had any success with this on either of these types of devices? Am i just missing something on the port configs on these devices?
Thanks for any information you can provide.