Wireless Access

Reply
Contributor I
Posts: 23
Registered: ‎11-13-2012

Which Aruba 3600 controller (master-slave) needs to have CA cert installed on it?

Hello -

 

I have been trying to get eap-tls working with our Cisco ACS server with no luck.  I am going to try and get this to work with eap-tls terminating on the controller.  We currently have one master controller and two slave controllers.  The APs which will be using eap-tls to authenticate its clients with are provisioned to one of the slave controllers and not the master. 

 

I have found the EAP-TLS Termination word document but it did not look like it was setup with a master-slave controller configuration.

 

Do I need to install a CA cert on both the master and slave, the master, or just the slave?

 

Thanks in advance for the help.

Guru Elite
Posts: 21,492
Registered: ‎03-29-2007

Re: Which Aruba 3600 controller (master-slave) needs to have CA cert installed on it?

Both.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I
Posts: 23
Registered: ‎11-13-2012

Re: Which Aruba 3600 controller (master-slave) needs to have CA cert installed on it?

Thanks cjoseph!

Search Airheads
Showing results for 
Search instead for 
Did you mean: