Wireless Access

last person joined: 2 days ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Wireless client could not print from colubris/hp bridge

This thread has been viewed 1 times

  • 1.  Wireless client could not print from colubris/hp bridge

    Posted Oct 10, 2017 02:04 PM

    Hi,

     

    We have Aruba 7210 controller with 6.5.3 AOS. here are 25 quantity AP 325 setup.

     

    In our setup colubris and hp wireless bridges connected on wireless network, there are small printers are connected using serial port on bridges.

    While wireless client trying to send print command printer could not print at the same time if i connected bridges on wired network wireless client are able to print. This setup was working fine before but today suddenly bridges stop printing over wireless network.

    Please suggest how to fix it.



  • 2.  RE: Wireless client could not print from colubris/hp bridge

    Posted Oct 10, 2017 11:02 PM

    hi nik-mh, try going into the virtual-ap profile and disable "broadcast-filter arp", then bounce the client in and out of the network once.