Wireless Access

Reply
Occasional Contributor I
Posts: 8
Registered: ‎02-11-2014

XSEC Point-to-Point

[ Edited ]

I have two 800 Aruba switches that are using (xsec point-to-point). I entered the correct MAC address from each other's end. 

 

 

Switch1-00:0b:86:50:f6:31

Interface fastethernet 1/1

Description "Link-to-Switch-2"

Trusted

No poe

Xsec vlan 4091 

Xsec point-to-point 00:0b:86:50:ff:11 key allowed vlan 201,3001,4091

 

 

 

Switch2-00:0b:86:50:ff:11

Interface fastethernet 1/0

Description "Link-to-Switch-1"

Trusted

No poe

Xsec vlan 4091 

Xsec point-to-point 00:0b:86:50:f6:31 key allowed vlan 201,3001,4091

 

 

Shouldn't this configuration work?

Occasional Contributor I
Posts: 8
Registered: ‎02-11-2014

Re: XSEC Point-to-Point

[ Edited ]

I think it will work.

Occasional Contributor I
Posts: 8
Registered: ‎02-11-2014

Re: XSEC Point-to-Point

Nope. The configuration below will work between two controllers.

 

Switch1-00:0b:86:50:f6:31

Interface fastethernet 1/1

Description "Link-to-Switch-2"

Trusted

No poe

Switchport vlan 1202 (switch vlan)

Xsec vlan 4091 

Xsec point-to-point 00:0b:86:50:ff:11 key allowed vlan 201,3001

 

 

 

Switch2-00:0b:86:50:ff:11

Interface fastethernet 1/0

Description "Link-to-Switch-1"

Trusted

No poe

Switchport VLAN 1202 (switch Vlan)

Xsec vlan 4091 

Xsec point-to-point 00:0b:86:50:f6:31 key allowed vlan 201,3001

Search Airheads
Showing results for 
Search instead for 
Did you mean: