I have some new ap-335's and they are operating in restricted mode. The status light is flashing green and according to datasheet thats what flashing indicates.
It says this is either due to the link not being 1gb or not enough power. All our Aruba ap's run on poe, we have mix of 105, 225, 135, 175 and now 335. all our switches are hp procurve 2910al (one 2920 due to hp warranty sending us the wrong replacement). I have hooked up 3 of the 335's on different switches and all have the same issue.
when i look at the switch it shows they are getting 25.5w. I tried with and without lldp, no difference.
here is a snippit from debug report on the ap:
-----------------begin paste -----------------
Power Status
------------
Operational State POE-AT: USB port disabled (Overridden by LLDP)
----------------- -----------------------------------------------
Current HW State POE-AF: USB disabled, 1x1 chain for both Radios
LLDP Negotiated POE Power 25.5W
----------------- end paste ---------------------
i am not sure what to make of this. it says its "operational state" is AT but the "Current HW State" is AF but its getting a reported 25.5W...