Wireless Access

Reply
Contributor II
Posts: 48
Registered: ‎11-02-2015

ap summary per local

Is there a command to view the number of active APs per controller?

 

show ap database-summary only gives me a total number.

-Joey
Community Administrator
Posts: 2,252
Registered: ‎12-03-2013

Re: ap summary per local

Give this a shot.

 

(Lab_Master_7024) #show ap database switch <IPADDRESS>

CWNA, ACMP, Security +
Contributor II
Posts: 48
Registered: ‎11-02-2015

Re: ap summary per local

ya, i've used that before.  show ap database switch "ip" | include Total gives me what i'm looking for with a little more typing. It would be a pain if I had more than 4 controllers...

-Joey
Aruba Employee
Posts: 31
Registered: ‎11-19-2007

Re: ap summary per local

Not sure what you mean by 'active' as looking at the database totals also includes APs that are down.

show license-usage ap

is another way to see how many APs are up that is a bit less stress on the fingers/keyboard. 

 

Cheers!
Marcus Wehmeyer
Contributor II
Posts: 48
Registered: ‎11-02-2015

Re: ap summary per local

I have 2 HA pair setup and one pair is having an issue with LACP timeouts. When they timeout, the APs move over to the secondary controller. 

 

I want to see how many "up" APs are currently assiciated to each controller without looking at a list and counting them manually.

 

 

-Joey
Highlighted
Aruba Employee
Posts: 31
Registered: ‎11-19-2007

Re: ap summary per local

Ah ok, maybe this then:

 

show ap active | include Num

 

and possibly helpful as well

 

show ap standby | include Num

 

 

Cheers!
Marcus Wehmeyer
Search Airheads
Showing results for 
Search instead for 
Did you mean: