in the controller configuration>advanced Services>redundancy
I have an HA group configuration with both controllers listed - both are set to active (not sure why the constultant did that) I just today selected the group name from the member of the HA group and saved the configuration.
In configuration>wireless> ap configuration under the AP group name
I went in to the ap > ap system and made sure the lms ws setup on all effected groups (it wasn't)
I don't know if it is correct on the backup controller to have the LMS be that controller first and then the backup as the primary
(if it makes sense the primary is CO the backup is NY so on the primary, the lms is CO, the backup LMS is NY, on the backup the LMS is NY, the backup is CO)
ap's are starting to show up on both controllers (that's a first) but when I run the show ap database command, I don't see the secondary IP listed, only the switch IP.
Lirria
Lirria