Wireless Access

Reply
New Contributor
Posts: 2
Registered: ‎02-09-2015

aruba instant nps 2008 r2 error

Hi,

im trying to set up radius authentication with my aruba instant setup.

i set up the clients. on the nps server(ive done this before)

i have it set up the exact same as i did at another customer.

termination off, added a group for users. and domain computers to be allowed in the policy

ignoring dial in rule

however when a client tries to connect they are prompted for credentials(they shouldnt be because the computer account is allowed) and when they type them in it doesnt work

error is attached

i have PEAP authentication type enabled

i noticed the authentication type is EAP in the error

when in my other organization the successful authentication type is PEAP

 

 

 

 

Guru Elite
Posts: 21,260
Registered: ‎03-29-2007

Re: aruba instant nps 2008 r2 error

Did you issue a server certificate for your NPS server?



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor
Posts: 2
Registered: ‎02-09-2015

Re: aruba instant nps 2008 r2 error

thanks,

found i didnt have a certificate set. i thought since it was a DC it would already have one.

followed this article https://technet.microsoft.com/en-us/library/cc754198(v=ws.10).aspx

configured the autoenrollment and it has a valid cert now but its still the same error.

MVP
Posts: 1,414
Registered: ‎11-30-2011

Re: aruba instant nps 2008 r2 error

NPS requires two parts configured correctly, the connection request policy and the network policy.

 

i would google for a good NPS config guide and compare your settings.

Search Airheads
Showing results for 
Search instead for 
Did you mean: