Wireless Access

Reply
Contributor I

configure MAC-based authentication

How do I configure MAC-based authentication on Aruba?
And Would this then only allow the user with that MAC address you entered to access the Wi-Fi .. because  I want to block everyone connecting to a WiFi, unless they provide me with their MAC address before hand so I can add it to the allowed list and allow them to connect.

Guru Elite

Re: configure MAC-based authentication

http://community.arubanetworks.com/t5/Controller-Based-WLANs/How-do-I-configure-MAC-based-authentication-on-Aruba/ta-p/182430

 

In the AAA profile, unless you configure layer 2 failthrough, clients will not be able to get on if their mac address is not in the internal database.

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Contributor I

Re: configure MAC-based authentication

I do all these steps .. but how can i add MACs to profile .. i need to block all users firsly unless who get their MACs
Guru Elite

Re: configure MAC-based authentication

Did you see this part of the article?

 

B. Configure Clients in the Internal Database

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: