Wireless Access

Reply
Occasional Contributor II
Posts: 22
Registered: ‎10-12-2009

control plane security disable

adding a new local controller that is a 7220 running 6.4.2 and I cannot disable Control PLane Security. Its greyed out. I am thinking this is why I cannot see the new local from the Master. Any ideas?

Frequent Contributor I
Posts: 97
Registered: ‎04-13-2009

Re: control plane security disable

Is CPSec enabled on Master? Do you have the same code on every controller?
Regards,
Marek Krauze, CWNE# 174, ACMX #295, ACDX #356
Something cool, helpful or interesting in my post - click the Kudos Star.
Helped to solve your problem - Click Accept as Solution
Occasional Contributor II
Posts: 22
Registered: ‎10-12-2009

Re: control plane security disable

No and yes :)

Occasional Contributor II
Posts: 22
Registered: ‎10-12-2009

Re: control plane security disable


marqs wrote:
Is CPSec enabled on Master? Do you have the same code on every controller?
Regards,

It is disabled on the Master and they are all running 6.4.2

Guru Elite
Posts: 21,281
Registered: ‎03-29-2007

Re: control plane security disable

- Control Plane Security is enabled/disabled at the master

- You cannot enable/disable it at the local

- If the local never contacted the master, either because of a bad PSK or other reasons, it will not show up in the master, AND you will not be able to change the Control Plane Security Status.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II
Posts: 22
Registered: ‎10-12-2009

Re: control plane security disable


cjoseph wrote:

- Control Plane Security is enabled/disabled at the master

- You cannot enable/disable it at the local

- If the local never contacted the master, either because of a bad PSK or other reasons, it will not show up in the master, AND you will not be able to change the Control Plane Security Status.


well when I setup the 7200 I entered the IP and MAC of the master in there but it never shows up in the Master

Guru Elite
Posts: 21,281
Registered: ‎03-29-2007

Re: control plane security disable

It is supposed to be the ip address and a preshared key, NOT the MAC of the master:

 

Please see here:  http://www.arubanetworks.com/techdocs/ArubaOS_63_Web_Help/Web_Help_Index.htm#ArubaFrameStyles/Adding_Local_Switches/Moving_to_a_Multi__Envir.htm on how to configure a PSK for a local controller and a master controller.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor
Posts: 3
Registered: ‎03-04-2013

Re: control plane security disable

Thanks for level of detail. I performed the inital controller steps and it didn't work using the mac address of the master. Instead, used your notes and it worked!

Thanks!

D

Search Airheads
Showing results for 
Search instead for 
Did you mean: