(OCDSB-M1-Pri) #show running-config | include port-channel
Building Configuration...
interface port-channel 0
interface port-channel 1
(OCDSB-M1-Pri) #show interface port-channel 0
Port-Channel 0 is administratively up
Hardware is Port-Channel, address is 00:1A:1E:01:7F:48 (bia 00:1A:1E:01:7F:48)
Description: Link Aggregate
Spanning Tree is disabled
Switchport priority: 0
Member port:
GE 0/0/0, Admin is up, line protocol is up
GE 0/0/1, Admin is up, line protocol is up
Last clearing of "show interface" counters 0 day 18 hr 7 min 18 sec
link status last changed 0 day 18 hr 5 min 6 sec
83297 packets input, 6453179 bytes
Received 78116 broadcasts, 0 runts, 0 giants, 0 throttles
0 input error bytes, 0 CRC, 0 frame
69492 multicast, 5181 unicast
33909 packets output, 4355603 bytes
0 output errors bytes, 0 deferred
0 collisions, 0 late collisions, 0 throttles
Port-Channel 0 is TRUSTED
(OCDSB-M1-Pri) #show interface port-channel 1
Port-Channel 1 is administratively down
Hardware is Port-Channel, address is 00:1A:1E:01:7F:48 (bia 00:1A:1E:01:7F:48)
Description: Link Aggregate
Spanning Tree is disabled
Switchport priority: 0
Member port:
Last clearing of "show interface" counters 0 day 18 hr 7 min 38 sec
link status last changed 0 day 18 hr 7 min 38 sec
0 packets input, 0 bytes
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input error bytes, 0 CRC, 0 frame
0 multicast, 0 unicast
0 packets output, 0 bytes
0 output errors bytes, 0 deferred
0 collisions, 0 late collisions, 0 throttles
Port-Channel 1 is TRUSTED
@cappalli wrote:
That command is definitely valid. Can you run:
show runn | include port-channel
Thanks,
Tim