Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

how to erased a ssid, when it says" in use"

This thread has been viewed 0 times

  • 1.  how to erased a ssid, when it says" in use"

    Posted Sep 24, 2013 03:49 PM

    In version 5.0.3.1 I am trying to delete a SSID but it errors out and says it is in use. It also seems not to be saving correctly. Thank you,Gabe



  • 2.  RE: how to erased a ssid, when it says" in use"

    EMPLOYEE
    Posted Sep 24, 2013 03:51 PM

    Is that SSID profile applied to an existing Virtual AP profile?



  • 3.  RE: how to erased a ssid, when it says" in use"

    Posted Sep 24, 2013 04:15 PM
    Hit the show references button and it'll tell you where the SSID profile is being referenced.


  • 4.  RE: how to erased a ssid, when it says" in use"

    Posted Sep 24, 2013 09:06 PM

    Run the following from the CLI if  you don't get a reference shown in the WebUI.  Some of the references don't always show (for example when used in traffic management profiles):

     

    show references wlan ssid-profile <profile-name>