Wireless Access

Reply
Contributor II

how to make certain AP broadcast certain SSID on controller

i was wonder if it possible or not, 

 here is my scenario, i have hotel i need to broadcast Guest SSID everywhere but  also i need some floor  Employee , contractor, and voice, but i need everywhere Guest SSID. 

(1) for example i have 14 Floor, i need Guest SSID to be broadcast floor 1 to 14 

(2) i need 2ND  and 14th floor employee SSID

(3) i need Basement Floor contractor  and Voice SSID 

 

but Guest SSID needs to be broadcast every corner of the building at the same time only some AP broadcast certain SSID but Guest still does. 

 

any idea please 

if it is possible from where i can start configuring, i have 7205 x 2 controller Version 6.4.3.1

 

thanks hope to hear soon 

 

Regard 

Tej Bahadur 

MVP

Re: how to make certain AP broadcast certain SSID on controller

Hi Tej,

 

yes, it is possible configuring AP groups with different VAPs and assign APs to those AP groups.

 

Have a look to this thread it is explained in detail. http://community.arubanetworks.com/t5/Wireless-Access/How-to-use-AP-GROUP/td-p/32828

 

Regards

Borja

Regards,
Borja
ACMX #567 //ACCP//CWNA//CWAP
Highlighted

Re: how to make certain AP broadcast certain SSID on controller

 

 You can also assign or exclude individual settings to single AP's as well using the AP Specific settings
 
Configuration > Wireless > AP Configuration ->  AP Specific
 
Or via CLI...
 
ap-name "XXXXXX"
virtual-ap "EmployeeVAP"
!

ACMA, ACMP
If my post addresses your query, give kudos:)
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: