Wireless Access

Reply
Occasional Contributor II
Posts: 17
Registered: ‎02-11-2013

limit bonjour traffic based on device location

 

I am aware of on how to program Clearpass to allow users to share bonjour traffic based on username, however I cannot find and documentation on how to limit bonjour traffic based on device location. For example, if a teacher or student is in room 205, they should only be able to see the AppleTV’s in nearby classroom and not the entire school.  Is there any documentation that anyone could provide to help assist programing this?

Guru Elite
Posts: 8,637
Registered: ‎09-08-2010

Re: limit bonjour traffic based on device location

[ Edited ]

When the device is registered in ClearPass guest as a shared device, select an AP-group name or AP name in the Shared Locations field.


Sent from Windows Mail


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor II
Posts: 17
Registered: ‎02-11-2013

Re: limit bonjour traffic based on device location

Where in clearpass would you do that.? In clearpass guest under create a device I do not see the Shared location feild.

Guru Elite
Posts: 8,637
Registered: ‎09-08-2010

Re: limit bonjour traffic based on device location

What version of ClearPass? In 6.3, you need to check the Enable AirGroup checkbox.






Sent from Windows Mail

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor II
Posts: 17
Registered: ‎02-11-2013

Re: limit bonjour traffic based on device location

I am assuming that is under Plugin manager, if so, yes i have enabled Airgroup services already.

Guru Elite
Posts: 8,637
Registered: ‎09-08-2010

Re: limit bonjour traffic based on device location

[ Edited ]

When you create a new device, there should be an enable AirGroup checkbox.






Sent from Windows Mail


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor II
Posts: 17
Registered: ‎02-11-2013

Re: limit bonjour traffic based on device location

I think I found it but I had to go under configuration Forms & views to access it. Now my next question is, would you have to configure every AppleTV to access a certain group of access point, or is there is easier way? The school has over 100 AppleTV's. And would they all have to be wirelessly connected instead of wired?

 

Guru Elite
Posts: 21,269
Registered: ‎03-29-2007

Re: limit bonjour traffic based on device location

For now, yes you would have to go to each device and define what AP or AP-Group you want it to be seen by. 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: