Wireless Access

Reply
Frequent Contributor I

need to move config from 7220 controller to 6000 controller

I need to take the backup off a 7220 controller and move it to a M3 Controller in a 6000 Chassis., is this even possible?  with the hardware diferences, will this work?  Is there anydocumentation that is available for this?

Frequent Contributor I

Re: need to move config from 7220 controller to 6000 controller

Thought of a possible work around, can I make the M3 a local off of the 7220, then remove it and promote it to a master?  Is it possible to promote a local to a master?  Doing this for a test lab to vet new OS versions..

 

Thank you

Guru Elite

Re: need to move config from 7220 controller to 6000 controller

That is the best way to do it.

 

Yes, you can promote a local to a master.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Frequent Contributor I

Re: need to move config from 7220 controller to 6000 controller

Thank you, can you give me the cli command to promote this to Master?

 

Thank you

Frequent Contributor I

Re: need to move config from 7220 controller to 6000 controller

Found where I needed to change it, thank you

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: