Wireless Access

last person joined: 11 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

obtaining the new HPE serial number for Aruba controller

This thread has been viewed 10 times

  • 1.  obtaining the new HPE serial number for Aruba controller

    Posted Sep 27, 2017 11:43 AM

    Hello experts ,

     

    since HPE has taken over Aruba , so the controllers that i have in the existing environment would have new HPE serial numbers ?

     

    i would have to renew the contract for the 7010 aruba controllers that i have in my existing network , and HPE is asking for some new HPE serial numbers which i dont have .   the serial number just contains 9 digits and they require a 10 digit serial number.

    could somebody help please ?

     

    all i have is below serial numbers

     

    UAM-BRLO1-MB00MDF-WC01) #show inventory

    Supervisor Card slot : 0
    System Serial# : CG0015533 (Date:08/07/16)
    CPU Card Serial# : AG32017319 (Date:08/06/16)
    CPU Card Assembly# : 2010184C
    CPU Card Revision : (Rev:14.00)



  • 2.  RE: obtaining the new HPE serial number for Aruba controller

    Posted Sep 27, 2017 01:29 PM
    That doesn't make sense. Just checked a few serials on controllers I've been working on recently and they're 9 characters long.


  • 3.  RE: obtaining the new HPE serial number for Aruba controller

    EMPLOYEE
    Posted Sep 27, 2017 02:27 PM

    New Aruba products will have serial numbers in the 10 digit HPE format, while older ones use the9-digit Aruba format.

    Serial numbers are permanently associated with the product, and cannot be changed.