Wireless Access

Reply
MVP
Posts: 765
Registered: ‎03-25-2009

restarting webservice

Is there a way to restart the webserver service of an Aruba controller?

After installing a new server cert the gui does not come back up and also the redirect from http to https isn't happening.

 

I'd rather not reboot the entire controller as there's quite q few users connected. 

No support on the box so no TAC available.

Koen (ACMX #351 | ACDX #547 | ACCP)

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
Aruba
Posts: 1,643
Registered: ‎04-13-2009

Re: restarting webservice

Can you try and put the default certificate back in place:

 

web-server no switch-cert

web-server switch-cert Default

 

 

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

Aruba
Posts: 1,643
Registered: ‎04-13-2009

Re: restarting webservice

If that does not work, you can try to restart:

 

process restart httpd

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

MVP
Posts: 765
Registered: ‎03-25-2009

Re: restarting webservice

ended up reloading before I saw this, then imported the im-ca and root-ca and tried again selecting the new server-cert and all is good again.

Thanks for the info though!

Koen (ACMX #351 | ACDX #547 | ACCP)

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
Search Airheads
Showing results for 
Search instead for 
Did you mean: