Wireless Access

Reply
Regular Contributor I

restrict access on the public interface on the controller.


Hi, 

 

I have a 3400 controller on code 6.1.3.6. This controller has a public interface; I wish to block any traffic from the internet on this interface.  The internal users go out to the internet by source nating. 

 

I must connect by pptp to the controller to this public interface, and then only I must be able to get on GUI and ssh of the controller. Otherwise all traffic from the outside to the public interface has to be blocked. 

 

Is it possible to archive it..?

 

Guru Elite

Re: restrict access on the public interface on the controller.

Please see the ip access-list at the bottom of the article here:  http://community.arubanetworks.com/t5/Command-of-the-Day/COTD-Connect-your-Aruba-Controller-to-a-Cable-Modem/m-p/951/highlight/true#M64

 

Substitute DHCP with whatever inbound protocol(s) you want.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: