At a site (one of 50), they have been complaining of poor speed through put. They have AP105s, local bridge SSID (no BC/MC boxes ticked!) and a "global" SSID which is tunneled, they only use the bridge. (latest 6.3 code)
We use band steering, client match and Spec LB. Should all be fairly standard.
I believe I should pick a client which is running slowly and debug it, right? What else should I be looking at? None of the APs show up in the monitoring tab as having a problem. It might be their local LAN or client side issues i.e. drivers. But, I'd like to get stuck into some CLI as soon as I get there. I don't think they have 11a cards in their dells which is a shame. Is there anything I can run against the APs to see if they are having a hard time with interferance or co-channel? Should I create another AP profile that will enable ALL channels and see if that helps? Its in a fairly normal residential area, its a small-ish school in a large house.
Thanks.