Wireless Access

Reply
New Contributor

update access points

What is the best practice to update Wireless Access Point 205 that get their IP via DHCP from mobility controller.

 

Cheers

Guru Elite

Re: update access points

Do you mean update firmware?  The release notes of each release has an upgrade section that details what can be done.  Is that what you mean?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
New Contributor

Re: update access points

Yes, my question is in relation to firmware update.
I have a mobility contrler with 5 Access points attached to it.
For example : I update my mobility controller from ArubaOS_MMC_6.4.3.6-FIPS_52928 to ArubaOS_MMC_6.4.3.7-FIPS_53991

so how do I go about it. My understanding is to update the mobility controler, reboot the controller and then reboot the APs. When APs will be rebooted they will get the running firmware from the Mobility Controller.

Sant

Guru Elite

Re: update access points

You would upgrade the controller...  It will automatically upgrade the APS after it reboots.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: