Search the Community
- Global Forums
- Airheads Channel Group - UK and Ireland
- Airheads Channel Group (German speaking)
- Airheads Channel Group - France
- Airheads Channel Groep – Nederland
- Airheads Channel Group - Italy
- Airheads Channel Group - Taiwan
- Airheads Channel Group - Singapore
- Airheads Channel Group - Malaysia
- Airheads Channel Group – Norway
- Airheads Channel Group South Africa
- Airheads Channel Group Bechtle
- Airheads Channel Group - Denmark
- Aruba Support KBs
- Community KBs
- ClearPass Exchange Recipes
- Aruba Support Documentation
- Software Downloads
- Knowledge Base
- ClearPass Recipe Review
- ClearPass Recipe Submission
- Admin Tool - Assign Role in Bulk
- Admin Tool - User Search
- CWNP Conf 2015
- Airheads Conference Vegas 2015
- Wlan Pro Conference 2015
- Airheads Conference Shanghai 2014
- WLAN Pro Conf EU 2014
- CWNP Conference 2014 (Sep 22 - 24)
- Airheads Local 2014
- Wireless Field Day 7 (Aug 6-8, 2014)
- Black Hat 2014 Contest
- Airheads EMEA Italy 2014 (June 9 - 13)
- Americas Airheads Conference 2014
- WLAN Professionals Summit 2014
- Airheads Roadshow 2013
- EMEA Airheads Conference 2013
- APJ Airheads Conference 2013
- Americas Airheads Conference 2013
- Americas Airheads Conference 2012
- APJ Airheads Conference 2012
- EMEA Airheads Conference 2012
- Airheads EMEA 2012 Contest: How to Enter - Contest Terms & Conditions
- Airheads EMEA 2012 Contest: Create your Entry to Win Here!
- Airheads Conferences Prior to 2012
- Americas Airheads Local Events 2012
- EMEA Airheads Local Events 2012
- Wireless Field Day 3 @ Aruba Networks
- Wireless Tech Field Day 2- Silicon Valley
- Wi-Fi Mobility Symposium- San Jose, CA USA
- SDN Apps
- Connector Translation Testing area
The application note focuses on configuration and operation of guest access solutions on ArubaOS. The native guest access solution including configuration of the guest access and guest provisioning profiles, guest administration, and captive portal configuration.
This guide covers Aruba Mobility Controllers and is considered part of the foundation guides within the VRD core technologies series. This guide will help you understand the capabilities and options you have when deploying an Aruba Mobility Controller. This guide describes operating modes for the mobility controller, licensing, forwarding modes, logical and physical deployment, redundancy, and how to select the appropriate mobility controller based on scalability requirements. Version 9 includes information on the 7200 series controller.
...or is it GRE and then PAPI Thank you in advance
I am new to aruba products. Can anyone explain the tunnel formation that is happening in master-local.
1. My AP is forming a PAPI tunnel with the master and then it checks the lms ip which is the local controller's IP.
2. Now my AP will it form PAPI tunnel at first with the local controller or is it GRE and then PAPI
Thank you in advance
This is a great document and all the VRDs are. My comment is this one document has the 600 series...
This is a great document and all the VRDs are. My comment is this one document has the 600 series controller which are end of life/sale. I wounder if there is someone working on a newer version that replaces them with 700 series?
ArubaOS is the operating system, software suite, and application engine that operates Aruba mobility controllers and centralizes control over the entire mobile environment. The ArubaOS wizards, command-line interface (CLI), and the ArubaOS Web UI are the primary means used to configure and deploy ArubaOS. For a complete description of ArubaOS, refer to the ArubaOS User Guide for your release.
- Find more articles tagged with:
...enable both MCAST Rate Optimization and DMO, but also rise DMO threshold to 80. How can be...
Thanks for your writing, very useful. I have a question on Mcast. On page 9 you recomend to enable both MCAST Rate Optimization and DMO, but also rise DMO threshold to 80. How can be preferable to use 80 TXOPs instead of broadcasting the MCAST frame at the optimized rate? Could you please point me to any reading to understand? Thanks!!!
[EDITED] An Aruba engineer kindly helped with this basic question. Mcast frames do not use MCS datarates and contains a single packet per PDU. DMO uses MCS datarates and many packets can be aggregated.
This document describes the Aruba Instant access point and Virtual Controller system as well as the procedure to integrate this system with AirWave. This section contains the following points:
l "Overview of Aruba Instant" on page 5
l "Instant Management with AirWave" on page 5
l "Using Aruba Instant with AirWave" on page 6
l "AMP Pages with Instant-Specific Features" on page 7
l "Supported Firmware" on page 8
Overview of Aruba Instant Aruba Instant:
(Instant) is a system of access points per Layer 2 subnet. Aruba Instant IAPs are controlled by a single IAP that serves a dual role as a primary Virtual Controller, eliminating the need for dedicated controller hardware. This system can be deployed through a simplified setup process appropriate for smaller organizations, or for multiple geographically dispersed locations without an on-site administrator. Only the first IAP/Virtual Controller you add to the network must be configured; the subsequent IAPs will all inherit the necessary configuration information from the Virtual Controller. Aruba Instant continually monitors the network to determine the IAP that should function as the Virtual Controller at any time, and the Virtual Controller will move from IAP to IAP as necessary without impacting network performance. The Virtual Controller technology in Aruba Instant is capable of IAP auto discovery, 802.1X authentication, role-based and device-based policy enforcement, rogue detection, and Adaptive Radio Management (ARM).
The ClearPass Deployment Guide is intended to assist Aruba SEs and network administrators, as well as
customers and partners, in deploying ClearPass Policy Manager.
This guide is organized in a way that presents the recommended sequence in which ClearPass deployment
should take place, and makes the major deployment tasks easy to understand and implement.
The ClearPass Deployment Guide includes the following information:
l Chapter 1: Install and configure ClearPass hardware and virtual appliances.
l Chapter 2: Prepare the Aruba Mobility Controller for integration with ClearPass Policy Manager.
l Chapter 3: Integrate ClearPass Policy Manager with Microsoft Active Directory.
l Chapter 4: Set up 802.1X wireless authentication with Active Directory.
l Chapter 5: Design and deploy ClearPass clusters.
l Chapter 6: Configure the Aruba Mobility Access Switch for 802.1X wired authentication.
l Chapter 7: Prepare ClearPass for LDAP and SQL authentication.
l Appendix A: Describes how a typical 802.1X authentication session flows when using ClearPass as the
authentication server with Microsoft Active Directory as the back-end user identity repository.
l Appendix B: Use the ClearPass Configuration API to configure or modify the entities in ClearPass without
logging into the Admin user interface. Information about how to access the entire set of APIs available
through ClearPass is also provided.
- Find more articles tagged with: