Wireless Access

last person joined: 21 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

LLDP and 2960x Cisco Switches

This thread has been viewed 0 times

  • 1.  LLDP and 2960x Cisco Switches

    Posted Jul 20, 2017 02:37 PM

    I have just installed 800 303H aps.  On some 2960 switches (all the same version of code and same model) the 303's come up with no issue.

     

    On some, 1 building in particular, while doing a show LLDP neighbor..

     

    I dont get alot of "W" fields populated under capabilities.

     

    Further, these AP's (lacking the W) show up on the controller with a "D" (dirty).

     

    Any one have any work arounds?  Thoughts?  I see that Cisco and aruba have had some similar issues on the boards..but not smoking gun/clean fix.

     

    I am running Cisco  15.2(2)E5.. supposedly has an existing patch for LLDP on this version.  WS-C2960X-48FPD-L   is my switch model.

     

    Aruba I am running 6.5.2.0



  • 2.  RE: LLDP and 2960x Cisco Switches

    EMPLOYEE
    Posted Jul 21, 2017 08:18 AM

    I am not sure about the LLDP.  Dirty indicates a connectivity issue between the AP and the controller.



  • 3.  RE: LLDP and 2960x Cisco Switches

    Posted Jan 03, 2020 05:29 AM

    i have the same problem, the same switch, same AP but different version of Controller(8.3)

    Do you resolve?

    my post https://community.arubanetworks.com/t5/Wireless-Access/AP-can-t-provisioning-with-Switch-Cisco-PoE/td-p/629596